Greg’s PlaceProjects / Assembly Guide

Assembly Guide

A Vision Pro prototype for the moment when one hand is holding a server rail, the other is holding the cabinet, and the diagram is on the next page.

On the workbench

The rail and the page

The first trial starts with a 12U rack manual. Pick the pages for one procedure and keep the manufacturer’s diagram beside the current instruction. An earlier page can hold the prerequisite, so the design keeps the whole PDF within reach.

“Which drawing shows the left rail?”

The intended answer opens the relevant page. If the drawing doesn’t establish what’s in front of the wearer, the guide should say so.

Voice controls in the design

Hands occupied

“Next”
Advance one step within the chosen procedure.
“Repeat”
Read the current instruction again, including its warnings.
“Do I use the next hole?”
Keep the step in place and treat the whole sentence as a question.

What the pilot needs to prove

Download a procedure, disconnect Wi-Fi, inspect the diagram and reopen the guide at the same step. The longer test is a Dell PowerEdge R730 service manual, where a procedure can refer to a warning many pages away. These are the workbench checks guiding development.

How the prototype is put together

A home gateway processes the selected PDF pages. The headset design keeps navigation local and calls the gateway for questions. A later experiment would let the wearer choose an existing iPhone photo when the question depends on a visible part.